sbr50-16js no. a0636-1/3 applications high frequency rectification (switching regulators, converters, choppers). features tj=150 c. low forward voltage (v f max=0.80v). short reverse recovery time. low switching noise. high reliability due to planar structure. attachment workability is good by mica-less package. specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit repetitive peak reverse voltage v rrm 160 v nonrepetitive peak reverse surge voltage v rsm 165 v average output current i o 50hz resistive load, sine wave tc=128 c5a surge forward current i fsm 50hz sine wave, 1 cycle 80 a junction temperature tj --55 to +150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit reverse voltage v r i r =1ma, tj=25 c* 160 v forward voltage v f i f =2.5a, tj=25 c* 0.77 0.80 v reverse current i r v r =160v, tj=25 c* 2.5 50 a note) * : value per element continued on next page. sanyo semiconductors data sheet ordering number : ENA0636 n2807sd ti im tc-00001000 specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, av equipment, communication device, office equipment, industrial equipment etc.). the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan sbr50-16js schottky barrier diode (twin type ?cathode common) 160v, 5a rectifier
sbr50-16js no. a0636-2/3 continued from preceding page. ratings parameter symbol conditions min typ max unit interterminal capacitance c v r =10v, tj=25 c* 48 pf thermal resistance rth(j-c) junction-case : smoothed dc 5.0 c / w note) * : value per element package dimensions electrical connection unit : mm (typ) 7525-001 anode anode cathode 1 : anode 2 : cathode 3 : anode sanyo : to-220ml(ls) 0.75 0.7 123 10.0 3.5 7.2 16.0 14.0 3.6 1.2 1.6 2.55 2.55 4.5 2.8 2.4 3.2 0 1.2 1.0 0.8 0.4 0.2 0.6 5 7 2 3 2 0.1 1.0 5 7 2 3 10 it11966 0 0.1 2 5 7 3 2 1.0 5 7 3 2 0.01 20 40 60 100 140 80 120 160 180 (3) (1) 0 0 4 5 6 3 1 2 17 36 5 4 2 it11968 (4) (3) (1) 0 0 0.4 0.6 1.2 0.2 1.0 0.8 140 180 100 60 160 120 80 40 20 (2) (4) (2) tj=150 c typ 25 c typ it11967 it11969 tj=150 c typ 125 c typ 100 c typ 75 c typ 10 5 7 3 i f -- v f i r -- v r p f (av) -- i o p r (av) -- v rm forward voltage, v f -- v forward current, i f -- a reverse voltage, v r -- v reverse current, i r -- m a peak reverse voltage, v rm -- v average reverse power dissipation, p r (av) -- w average output current, i o -- a average forward power dissipation, p f (av) -- w 180 360 v r (1)rectangular wav e =300 (2)rectangular wav e =240 (3)rectangular wav e =180 (4)sine wav e =180 (1)rectangular wav e =60 (2)rectangular wav e =120 (3)rectangular wav e =180 (4)sine wav e =180 sine wave 180 360 sine wave 360 v r rectangular wave 360 rectangular wave
sbr50-16js no. a0636-3/3 ps sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. (4) (3) 01 130 160 150 140 120 110 100 90 246 57 3 (2) (1) it11970 2 100 2 2 3 3 5 10 5 7 357 1.0 23 57 10 2 0.1 f=100khz it11971 357 100 tc -- i o case temperature, tc -- c average output current, i o -- a (1)rectangular wav e =60 (2)rectangular wav e =120 (3)rectangular wav e =180 (4)sine wav e =180 360 rectangular wave 180 360 sine wave c -- v r interterminal capacitance, c -- pf reverse voltage, v r -- v 0.01 23 7 7 0.1 0 52 23 37 1.0 5 120 60 80 100 20 40 id01009 rth(j-c) -- t transient thermal resistance, rth(j-c) -- c / w time, t -- s i fsm -- t surge forward current, i fsm (peak) -- a time, t -- s i s 20ms t 0.001 0.01 0.1 1.0 10 2 3 525252357 37 37 37 7 5 3 2 5 7 1.0 10 id01010 current waveform 50hz sine wave this catalog provides information as of november, 2007. specifications and information herein are subject to change without notice.
|
